Foxbox

UMS SMS Modem..

Prepare Modem

	Insert sim cards (sim2 cardholder is on the backside of board) 01 – Plug-in antenna connectors 02 – Plug-in Ethernet cable 03 – Plug-in power cable 04 – Optional Serial Cable 05 – Optional USB extention

System Login

Once modem is prepared and booted (the modem will make a single beep when booted), browse to http://192.168.1.2 and login with USERNAME: admin and PASSWORD: admin

Click “Continue to this website (not recommended)”

Main Page

After login the system info page appears.

Shows status of the modem.

Click the to open menu

Network Configuration

Click “Network Config” in menu

Change IP settings and press “Save Configuration”, reboot modem on “inLogic Modem Settings” page.

Modem Settings

Frontend and Hostname Settings

Hostname

Click “inLogic Modem Settings”

Set Modem Hostname as FQDN.

Scroll down and Click “Save” and the modem will restart.

Frontend

Click “inLogic Modem Settings”

Change FrontEnd Address to fit your configuration.

Scroll down and Click “Save”