Inlogicmodem: Difference between revisions
Created page with "<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote> == Network Port Openings == ==== TCP port openings from server to modem. =..." |
No edit summary |
||
| Line 1: | Line 1: | ||
<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote> | <blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote>[[File:Foxbox.png|none|thumb]] | ||
== Network Port Openings == | == Network Port Openings == | ||
| Line 32: | Line 32: | ||
|HTTPS access | |HTTPS access | ||
|} | |} | ||
== Prepare Modem == | |||
{| | |||
![[File:Foxbox_OpenModem.png|alt=Inside Foxbox|none|thumb]] | |||
!Insert sim cards (sim2 cardholder is on the backside of board) | |||
01 – Plug-in antenna connectors | |||
02 – Plug-in Ethernet cable | |||
03 – Plug-in power cable | |||
04 – Optional Serial Cable | |||
05 – Optional USB extention | |||
! | |||
! | |||
|- | |||
| | |||
| | |||
| | |||
| | |||
|- | |||
| | |||
| | |||
| | |||
| | |||
|- | |||
| | |||
| | |||
| | |||
| | |||
|} | |||
== System Login == | |||
Once modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), browse to <nowiki>http://192.168.1.2</nowiki> and click login in upper right corner. | |||
[[File:Foxbox Login.png|none|thumb]] | |||
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin | |||
[[File:Foxbox Login Modal.png|none|thumb]] | |||
== Main Page == | |||
After login the system info page appears. | |||
Shows status of the modem. | |||
[[File:Foxbox index menu closed.png|none|thumb]]Click the [[File:Foxbox menu button.png|frameless|23x23px]] to open menu | |||
[[File:Foxbox index menu open.png|none|thumb]] | |||
== Network Configuration == | |||
Click “Network Config” in menu | |||
Change IP settings and press “Save Configuration”, [[Foxbox#Reboot|Reboot]] modem on “inLogic Modem Settings” page. | |||
[[File:Foxbox Network Config.png|none|thumb]] | |||
== Modem Settings == | |||
=== Frontend and Hostname Settings === | |||
==== Hostname ==== | |||
Click “inLogic Modem Settings” | |||
Set Modem Hostname as FQDN. | |||
Scroll down and Click “Save” and the modem will restart. | |||
[[File:Foxbox Hostname inLogic Modem Settings.png|none|thumb]] | |||
==== Frontend ==== | |||
Click “inLogic Modem Settings” | |||
Change FrontEnd Address to fit your configuration. | |||
Scroll down and Click “Save” | |||
[[File:Foxbox Frontend inLogic Modem Settings.png|none|thumb]] | |||
=== Certificate(https) Settings === | |||
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings” | |||
Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines). | |||
Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart. | |||
[[File:Foxbox Certificate inLogic Modem Settings.png|none|thumb]] | |||
=== User Settings === | |||
In the menu click “inLogic Modem Settings” and scroll down to “User Settings” | |||
To change default admin user password (default “admin”), write new password in Password box just below admin username. | |||
To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username. | |||
Click “Save” to confirm password change. | |||
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|thumb]] | |||
=== SIM Settings === | |||
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings” | |||
Enable / Disable PIN for modems and set PIN if needed. | |||
Click “Save”. After save Click [[Foxbox#Reboot|Reboot]]. | |||
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|thumb]] | |||
== Control Panel == | |||
In the menu click "Control Panel". | |||
Use Control Panel to see State of SMS Engine, turn on/off SMS Engine. | |||
[[File:Foxbox Control Panel.png|none|thumb]] | |||
== SMS == | |||
=== Inbox === | |||
Click “Inbox” in menu to see a log of incoming messages. | |||
[[File:Foxbox Inbox.png|none|thumb]] | |||
=== Outbox === | |||
Click “Outbox” in menu to see a log of outgoing messages. | |||
[[File:Foxbox Outbox.png|none|thumb]] | |||
=== Write New === | |||
Click “Write New” in menu to see a log of outgoing messages. | |||
<span style="background-color: #FFFF00">Choose what modem to send from or leave as is to choose first free modem.</span> | |||
<span style="background-color: #00FF00">Insert mobile phone number to send to. (international prefix is mandatory)</span> | |||
<span style="background-color: #0000FF; color: #FFFFFF">Write text to send.</span> | |||
Click “Send” to continue. | |||
[[File:Foxbox Write New.png|none|thumb]] | |||
== Time Zone Settings == | |||
Time zone and NTP server settings | |||
For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe) | |||
For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox. | |||
To set your Time Zone, click Time Zone dropdown and choose your zone. | |||
Click Save to change configuration. | |||
[[File:Foxbox Time Zone Settings.png|none|thumb]] | |||
== Tools == | |||
Click "inLogic Modem Settings" in menu and go to bottom of page. | |||
=== Shell === | |||
In browser shell to change advanced settings (USE with caution) | |||
[[File:Foxbox Shell inLogic Modem Settings.png|none|thumb]] | |||
=== Reboot === | |||
Reboot modem. | |||
[[File:Foxbox Reboot inLogic Modem Settings.png|none|thumb]] | |||
=== Root Settings === | |||
Change of root password requires login to shell. | |||
Login to shell, run passwd command and follow instructions on screen. | |||
[[File:Foxbox Root inLogic Modem Settings.png|none|thumb]] | |||
__FORCETOC__ | |||
Revision as of 00:24, 17 May 2018
UMS SMS Modem.. ( Certificate is required for use of Modem )
Network Port Openings
TCP port openings from server to modem.
| Port | Usage |
|---|---|
| 22 | SSH access |
| 80 | HTTP access |
| 443 | HTTPS access |
| 3306 | Database access |
TCP port openings from modem to server.
| Port | Usage |
|---|---|
| 80 | HTTP access |
| 443 | HTTPS access |
Prepare Modem
 |
Insert sim cards (sim2 cardholder is on the backside of board)
01 – Plug-in antenna connectors 02 – Plug-in Ethernet cable 03 – Plug-in power cable 04 – Optional Serial Cable 05 – Optional USB extention |
||
|---|---|---|---|
System Login
Once modem is prepared and booted (the modem will make a single beep when booted), browse to http://192.168.1.2 and click login in upper right corner.
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin
Main Page
After login the system info page appears.
Shows status of the modem.
Click the 
to open menu
Network Configuration
Click “Network Config” in menu
Change IP settings and press “Save Configuration”, Reboot modem on “inLogic Modem Settings” page.
Modem Settings
Frontend and Hostname Settings
Hostname
Click “inLogic Modem Settings”
Set Modem Hostname as FQDN.
Scroll down and Click “Save” and the modem will restart.
Frontend
Click “inLogic Modem Settings”
Change FrontEnd Address to fit your configuration.
Scroll down and Click “Save”
Certificate(https) Settings
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings”
Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines).
Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart.
User Settings
In the menu click “inLogic Modem Settings” and scroll down to “User Settings”
To change default admin user password (default “admin”), write new password in Password box just below admin username.
To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.
Click “Save” to confirm password change.
SIM Settings
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings”
Enable / Disable PIN for modems and set PIN if needed.
Click “Save”. After save Click Reboot.
Control Panel
In the menu click "Control Panel".
Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
SMS
Inbox
Click “Inbox” in menu to see a log of incoming messages.
Outbox
Click “Outbox” in menu to see a log of outgoing messages.
Write New
Click “Write New” in menu to see a log of outgoing messages.
Choose what modem to send from or leave as is to choose first free modem.
Insert mobile phone number to send to. (international prefix is mandatory)
Write text to send.
Click “Send” to continue.
Time Zone Settings
Time zone and NTP server settings
For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe)
For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox.
To set your Time Zone, click Time Zone dropdown and choose your zone.
Click Save to change configuration.
Tools
Click "inLogic Modem Settings" in menu and go to bottom of page.
Shell
In browser shell to change advanced settings (USE with caution)
Reboot
Reboot modem.
Root Settings
Change of root password requires login to shell.
Login to shell, run passwd command and follow instructions on screen.
