Foxbox: Difference between revisions

From UmsWiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
Khm (talk | contribs)
Bureaucrats, engineering, Administrators
132 edits
No edit summary
 
(19 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote>[[File:Foxbox.png|none|thumb]]
<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote>[[File:Foxbox.png|none|thumb|286x286px]]


== Network Port Openings ==
==Network Port Openings==
A few TCP ports have to be open from server to modem.
 
====TCP port openings from server to modem.====
{| class="wikitable"
{| class="wikitable"
!Port
!Port
Line 20: Line 21:
|}
|}


== Prepare Modem ==
====TCP port openings from modem to server.====
{| class="wikitable"
!Port
!Usage
|-
|80
|HTTP access
|-
|443
|HTTPS access
|}
 
==Prepare Modem==
{|
{|
![[File:Foxbox_OpenModem.png|alt=Inside Foxbox|none|thumb]]
![[File:Foxbox_OpenModem.png|alt=Inside Foxbox|none|thumb]]
!Insert sim cards (sim2 cardholder is on the backside of board)
!Insert sim cards (sim2 cardholder is on the backside of the board)
01 – Plug-in antenna connectors
01 – Plug-in antenna connectors


Line 30: Line 43:
03 – Plug-in power cable
03 – Plug-in power cable


04 – Optional Serial Cable
04 – Optional serial cable


05 – Optional USB extention
05 – Optional USB extention
Line 52: Line 65:
|}
|}


== System Login ==
==System Login==
Once modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), browse to <nowiki>http://192.168.1.2</nowiki> and click login in upper right corner.
Once the modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), open a browser and go to <nowiki>http://192.168.1.2</nowiki> and click login in the upper right corner.
[[File:Foxbox Login.png|none|thumb]]
[[File:Foxbox Login.png|none|1180x1180px|thumb]]
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin
A login box will pop up. Login with username 'admin' and password 'admin'.
[[File:Foxbox Login Modal.png|none|thumb]]
[[File:Foxbox Login Modal.png|none|510x510px|thumb]]
 
==Main Page==
After logging in, the system info page appears. This page shows status for the modem.[[File:Foxbox index menu closed.png|none|1300x1300px|thumb]]Click on [[File:Foxbox menu button.png|frameless|23x23px]] to open the menu.
[[File:Foxbox index menu open.png|none|1300x1300px|thumb]]
 
==Network Configuration==
Go to the menu and click 'Network Config'.
 
Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and [[Foxbox#Reboot|reboot]] the modem.
[[File:Foxbox Network Config.png|none|1300x1300px|thumb]]


== Main Page ==
==Modem Settings==
After login the system info page appears.


Shows status of the modem.
===Frontend and Hostname settings===
[[File:Foxbox index menu closed.png|none|thumb]]Click the [[File:Foxbox menu button.png|frameless|23x23px]] to open menu
[[File:Foxbox index menu open.png|none|thumb]]


== Network Configuration ==
====Frontend====
Click “Network Config” in menu
Open the menu and go to 'inLogic Modem Settings'.


Change IP settings and press “Save Configuration”, [[Foxbox#Reboot|Reboot]] modem on “inLogic Modem Settings” page.
Change the 'FrontEnd Address' to fit your configuration.
[[File:Foxbox Network Config.png|none|thumb]]


== Modem Settings ==
Scroll down and click 'Save'.
[[File:Foxbox Frontend inLogic Modem Settings.png|none|1300x1300px|thumb]]


=== Frontend and Hostname Settings ===
===Hostname===
Open the menu and go to 'inLogic Modem Settings'.


==== Hostname ====
Set the modem hostname as 'FQDN'.
Click “inLogic Modem Settings”


Set Modem Hostname as FQDN.
Scroll down and click 'Save'. The modem will restart.
[[File:Foxbox Hostname inLogic Modem Settings.png|none|1300x1300px|thumb]]


Scroll down and Click “Save” and the modem will restart.
====User Settings====
[[File:Foxbox Hostname inLogic Modem Settings.png|none|thumb]]
Open the menu and go to 'inLogic Modem Settings' and scroll down to 'User Settings'.


==== Frontend ====
To change default admin user password (default 'admin'), write the new password in the Password box, just below admin username.
Click “inLogic Modem Settings”


Change FrontEnd Address to fit your configuration.
To change default sendsms user password (default 'sendsms'), write the new password in the Password box just below sendsms username.


Scroll down and Click “Save”
Click 'Save' to confirm password change.
[[File:Foxbox Frontend inLogic Modem Settings.png|none|thumb]]
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]


=== Certificate(https) Settings ===
===SIM Settings===
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings”
Open the menu and go to 'inLogic Modem Settings' and scroll down to 'SIM Settings'.


Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines).
Do not enable pin settings for any modem. It does not work. All ping codes must be removed from the cards.


Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart.
Click 'Save' and click [[Foxbox#Reboot|Reboot]].
[[File:Foxbox Certificate inLogic Modem Settings.png|none|thumb]]
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]


=== User Settings ===
==Control Panel==
In the menu click “inLogic Modem Settings” and scroll down to “User Settings”
Open the menu and go to 'Control Panel'.


To change default admin user password (default “admin”), write new password in Password box just below admin username.
Here, you can see staus, as well as turn on and off, the SMS Engine.[[File:Foxbox_Control_Panel.png|none|1300x1300px|thumb]]


To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.
==SMS==


Click “Save” to confirm password change.
===Inbox===
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|thumb]]
To see a log for incoming messages, open the menu and go to 'Inbox'.
[[File:Foxbox Inbox.png|none|1300x1300px|thumb]]


=== MySQL Settings ===
===Outbox===
In the menu click “inLogic Modem Settings” and scroll down to “MySQL Settings”
To see a log for outgoing messages, open the menu and go to 'Outbox'.
[[File:Foxbox Outbox.png|none|1300x1300px|thumb]]
===Write New===
To write a new SMS, open the menu and go to 'Write New'.


To change default umsservice user password (default “admin”), write new password in Password box just below umsservice.
Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.


Scroll down and click “Save” to confirm password change.
Enter the phone number you wish to send your SMS to in the 'To' field. Please note that international prefix is mandatory.
[[File:Foxbox MYSQL inLogic Modem Settings.png|none|thumb]]


=== SIM Settings ===
Write your message in the 'Message' field.
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings”


Enable / Disable PIN for modems and set PIN if needed.
When you have finished, click 'Send'.[[File:Foxbox Write New.png|none|1300x1300px|thumb]]


Click “Save”. After save Click [[Foxbox#Reboot|Reboot]].
==Time Zone Settings==
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|thumb]]
Open the menu and go to 'Time Zone Settings'.


== Control Panel ==
The NTP & Time Zone Settings is by default set to enable external NTP.
In the menu click "Control Panel".


Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.
[[File:Foxbox Control Panel.png|none|thumb]]


== SMS ==
To change your time zone, choose a time zone from the 'Time Zone' drop down menu.


=== Inbox ===
Click 'Save' to change your settings.[[File:Foxbox Time Zone Settings.png|none|1300x1300px|thumb]]
Click “Inbox” in menu to see a log of incoming messages.
[[File:Foxbox Inbox.png|none|thumb]]


=== Outbox ===
==Tools==
Click “Outbox” in menu to see a log of outgoing messages.
Open the menu and go to 'Modem Settings'.
[[File:Foxbox Outbox.png|none|thumb]]
===Shell===
Use 'in browser' shell to change advanced settings.


=== Write New ===
<u style="color:red;">Use with caution!</u> Please note that if you make any changes without consulting inLogic first, support will be charged accordingly to our hourly rate.[[File:Foxbox Shell inLogic Modem Settings.png|none|1300x1300px|thumb]]
Click “Write New” in menu to see a log of outgoing messages.


<span style="background-color: #FFFF00">Choose what modem to send from or leave as is to choose first free modem.</span>
===Reboot===
In order to reboot the modem, click on the 'Reboot Modem' button.
[[File:Foxbox Reboot inLogic Modem Settings.png|none|1300x1300px|thumb]]


<span style="background-color: #00FF00">Insert mobile phone number to send to. (international prefix is mandatory)</span>
===Root Settings===
Change of root password requires login to shell. Default root password is 'odroid'.


<span style="background-color: #0000FF; color: #FFFFFF">Write text to send.</span>
Login to shell, run password command and follow the instructions on screen.


Click “Send” to continue.
This is not possible from the web interface.[[File:Foxbox Root inLogic Modem Settings.png|none|1300x1300px|thumb]]
[[File:Foxbox Write New.png|none|thumb]]


== Time Zone Settings ==
==Update certificate==
Time zone and NTP server settings


For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe)
===Step one - creating a certificate.pem file===
Make sure you have the certificate as a­ . crt or .pem file. You should have received a certificate with a private key from your provider. Some providers send two or more files containing this.


For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox.
To handle the certificate, we need to extract the information from the certificate and private key and combine these two into one certificate.


To set your Time Zone, click Time Zone dropdown and choose your zone.
If you use notepad to open the certificate (recommended), you will see this:
-----BEGIN CERTIFICATE-----
Lots of data here...
-----END CERTIFICATE-----
When you open the private key certificate, you should see this:
-----BEGIN RSA PRIVATE KEY-----
Lots of data here...
-----END RSA PRIVATE KEY-----
Or this:
-----BEGIN PRIVATE KEY-----
Lots of data here...
-----END PRIVATE KEY-----
Start by creating a new .txt file in a folder and then copy the content of the private key into the new .txt file.


Click Save to change configuration.
Now, open the certificate file, copy the content and paste it in after the private key.
[[File:Foxbox Time Zone Settings.png|none|thumb]]


== Tools ==
Your file should look like this:
Click "inLogic Modem Settings" in menu and go to bottom of page.
-----BEGIN PRIVATE KEY-----
MIIEvQIBAD...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIICsjCCAZqgAw...
-----END CERTIFICATE-----
Save the file by selecting all file types instead of .txt and name the file 'certificate.pem'.


=== Shell ===
===Step two - installation===
In browser shell to change advanced settings (USE with caution)
To install the certificate, you will need FTP software (you can freely select the FTP software you prefer).
[[File:Foxbox Shell inLogic Modem Settings.png|none|thumb]]


=== Reboot ===
Now, connect to the Foxbox using the server's IP address. This example uses 'FileZilla'.
Reboot modem.
[[File:Filezilla_foxbox_update_certificate.jpg|none|thumb|839x839px]]
[[File:Foxbox Reboot inLogic Modem Settings.png|none|thumb]]


=== Root Settings ===
Change of root password requires login to shell.


Login to shell, run passwd command and follow instructions on screen.
When the client has connected, you will have the folder view where you can navigate to '/etc/sms/scripts'. You can use the folder view to navigate back to the path or you can simply paste the path into the remote site bar and press enter.
[[File:Foxbox Root inLogic Modem Settings.png|none|thumb]]
 
Now, you should be able to locate the certificate.pem file inside the folder.
 
Continue by navigating the local file view to the new certificate that we created in step 1 and upload it to the Foxbox.
 
===Steep three===
Open or download the SSH client program. This example uses 'putty'.
 
When you have the ssh client open, please connect using the Foxbox server's IP address.
 
When successfully connected, please use the root user to login, as it is the only user with permissions to restart the apache server.
 
In order to restart the apache server, please type:  
/etc/init.d/apache2 restart
Press enter.
 
When the service is restarted successfully, 'OK' will appear in green text. If the service was unsuccessful, the error message will appear in red text.
 
After successfully restarting, open the Foxbox url and verify that the certificate has been changed and is valid.
 
===Additional information===
Additional information about the product, users, and programs used in the tutorial.
 
====Usernames and passwords====
{| class="wikitable"
|+A list of username and passwords
!Username
!Password
!Description
|-
|admin
|admin
|Admin user
|-
|sendSMS
|sendSMS
|Only allowed to send SMS
|-
|root
|foxbox
|Root user, main system user
|-
|foxbox
|foxbox
|Foxbox user is scaled down root user
|}
 
====SSH Clients====
{| class="wikitable"
|+A list of SSH Clients
!Program name
!URL
|-
|PuTTy
|<nowiki>https://www.putty.org/</nowiki>
|}
 
====Open source FTP Client====
{| class="wikitable"
|+A list of FTP clients
!Program name
!URL
|-
|WinSCP
|<nowiki>https://winscp.net/eng/index.php</nowiki>
|-
|FileZilla
|<nowiki>https://filezilla-project.org/</nowiki>
|-
|
|
|}
__FORCETOC__
__FORCETOC__

Latest revision as of 09:59, 30 January 2019

UMS SMS Modem.. ( Certificate is required for use of Modem )

Network Port Openings

TCP port openings from server to modem.

Port Usage
22 SSH access
80 HTTP access
443 HTTPS access
3306 Database access

TCP port openings from modem to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

Inside Foxbox
 Insert sim cards (sim2 cardholder is on the backside of the board)

01 – Plug-in antenna connectors

02 – Plug-in Ethernet cable

03 – Plug-in power cable

04 – Optional serial cable

05 – Optional USB extention

System Login

Once the modem is prepared and booted (the modem will make a single beep when booted), open a browser and go to http://192.168.1.2 and click login in the upper right corner.

A login box will pop up. Login with username 'admin' and password 'admin'.

Main Page

After logging in, the system info page appears. This page shows status for the modem.

Click on to open the menu.

Network Configuration

Go to the menu and click 'Network Config'.

Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and reboot the modem.

Modem Settings

Frontend and Hostname settings

Frontend

Open the menu and go to 'inLogic Modem Settings'.

Change the 'FrontEnd Address' to fit your configuration.

Scroll down and click 'Save'.

Hostname

Open the menu and go to 'inLogic Modem Settings'.

Set the modem hostname as 'FQDN'.

Scroll down and click 'Save'. The modem will restart.

User Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'User Settings'.

To change default admin user password (default 'admin'), write the new password in the Password box, just below admin username.

To change default sendsms user password (default 'sendsms'), write the new password in the Password box just below sendsms username.

Click 'Save' to confirm password change.

SIM Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'SIM Settings'.

Do not enable pin settings for any modem. It does not work. All ping codes must be removed from the cards.

Click 'Save' and click Reboot.

Control Panel

Open the menu and go to 'Control Panel'.

Here, you can see staus, as well as turn on and off, the SMS Engine.

SMS

Inbox

To see a log for incoming messages, open the menu and go to 'Inbox'.

Outbox

To see a log for outgoing messages, open the menu and go to 'Outbox'.

Write New

To write a new SMS, open the menu and go to 'Write New'.

Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.

Enter the phone number you wish to send your SMS to in the 'To' field. Please note that international prefix is mandatory.

Write your message in the 'Message' field.

When you have finished, click 'Send'.

Time Zone Settings

Open the menu and go to 'Time Zone Settings'.

The NTP & Time Zone Settings is by default set to enable external NTP.

For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.

To change your time zone, choose a time zone from the 'Time Zone' drop down menu.

Click 'Save' to change your settings.

Tools

Open the menu and go to 'Modem Settings'.

Shell

Use 'in browser' shell to change advanced settings.

Use with caution! Please note that if you make any changes without consulting inLogic first, support will be charged accordingly to our hourly rate.

Reboot

In order to reboot the modem, click on the 'Reboot Modem' button.

Root Settings

Change of root password requires login to shell. Default root password is 'odroid'.

Login to shell, run password command and follow the instructions on screen.

This is not possible from the web interface.

Update certificate

Step one - creating a certificate.pem file

Make sure you have the certificate as a­ . crt or .pem file. You should have received a certificate with a private key from your provider. Some providers send two or more files containing this.

To handle the certificate, we need to extract the information from the certificate and private key and combine these two into one certificate.

If you use notepad to open the certificate (recommended), you will see this: 

-----BEGIN CERTIFICATE----- 
Lots of data here...
-----END CERTIFICATE-----

When you open the private key certificate, you should see this: 

-----BEGIN RSA PRIVATE KEY----- 
Lots of data here...
-----END RSA PRIVATE KEY-----

Or this: 

-----BEGIN PRIVATE KEY----- 
Lots of data here...
-----END PRIVATE KEY-----

Start by creating a new .txt file in a folder and then copy the content of the private key into the new .txt file.

Now, open the certificate file, copy the content and paste it in after the private key.

Your file should look like this: 

-----BEGIN PRIVATE KEY-----
MIIEvQIBAD...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIICsjCCAZqgAw...
-----END CERTIFICATE-----

Save the file by selecting all file types instead of .txt and name the file 'certificate.pem'.

Step two - installation

To install the certificate, you will need FTP software (you can freely select the FTP software you prefer).

Now, connect to the Foxbox using the server's IP address. This example uses 'FileZilla'.


When the client has connected, you will have the folder view where you can navigate to '/etc/sms/scripts'. You can use the folder view to navigate back to the path or you can simply paste the path into the remote site bar and press enter.

Now, you should be able to locate the certificate.pem file inside the folder.

Continue by navigating the local file view to the new certificate that we created in step 1 and upload it to the Foxbox.

Steep three

Open or download the SSH client program. This example uses 'putty'.

When you have the ssh client open, please connect using the Foxbox server's IP address.

When successfully connected, please use the root user to login, as it is the only user with permissions to restart the apache server.

In order to restart the apache server, please type: 

/etc/init.d/apache2 restart

Press enter.

When the service is restarted successfully, 'OK' will appear in green text. If the service was unsuccessful, the error message will appear in red text.

After successfully restarting, open the Foxbox url and verify that the certificate has been changed and is valid.

Additional information

Additional information about the product, users, and programs used in the tutorial.

Usernames and passwords

A list of username and passwords
Username Password Description
admin admin Admin user
sendSMS sendSMS Only allowed to send SMS
root foxbox Root user, main system user
foxbox foxbox Foxbox user is scaled down root user

SSH Clients

A list of SSH Clients
Program name URL
PuTTy https://www.putty.org/

Open source FTP Client

A list of FTP clients
Program name URL
WinSCP https://winscp.net/eng/index.php
FileZilla https://filezilla-project.org/
Retrieved from "http://wiki.inlogic.dk/index.php?title=Foxbox&oldid=2396"