InLogic SMS Gateway: Difference between revisions

Latest revision as of 07:17, 23 April 2024

Important

To be able to send SMS, the inLogic SMS Gateway requires GSM modems with USB interface. We recommend "HUAWEI LTE USB Stick Model: E3372".

Hardware Compatibility List

Huawei E3531

Huawei E3372 (inLogic's choice)

Huawei E3131i

TP-Link MA260

Network Port Openings

TCP port openings from server to gateway. TCP port opening where UMS sms sever service run.

Port	Usage
22	SSH access
443	HTTPS access

TCP port openings from gateway to server.

Port	Usage
80	HTTP access
443	HTTPS access

Prepare Modem

	Plug-in Modems
	Plug-in Ethernet cable Plug-in power cable

System Login

Once the gateway is prepared and booted, open a browser and go to http://192.168.1.2. Login through the 'Login' button in the top right corner.

You will now see a login box where you can log in with with USERNAME: admin and PASSWORD: admin.

Main Page

After logging in, the system info page appears. This page shows the gateway's status.

To open the menu, click on this icon:

Network Configuration

Click on menu tab 'Network config'.

Change the IP settings and press 'Save Configuration'. When you have saved your settings, Reboot the gateway as instructed below in 'Modem Settings'.

Modem Settings

Hostname and Frontend Settings

Hostname

Open the menu and go to 'Modem Settings'.

Set 'Modem Hostname' as FQDN and save your changes. Your modem will now restart.

Frontend

Open the menu and go to 'Modem Settings'.

If redirect is enable on iis set (HTTPS)

Change 'FrontEnd Address' to fit your configuration and save your settings.

Certificate Settings (https)

Open the menu and go to 'Modem Settings'.

Click 'Choose File' and choose a .pfx certificate from your computer.

Entera a .pfx certificate password in the 'Certificate Password' field and click 'Save'.

User Settings

Open the menu and go to 'Modem Settings'.

The default admin user password is 'admin'. To change the default admin user password, write the new password in the 'Password' field just below the 'Username' field admin.

The default sendsms user password is 'sendsms'. To change the default sendsms user password, write the new password in the 'Password' field just below the 'Username' field sendsms.

Click 'Save' to confirm the password change.

Control Panel

Open the menu and go to 'Control Panel'.

Here, you can see staus, as well as turn on and off, the SMS Engine.

SMS

Inbox

To see a log for incoming messages, open the menu and go to 'Inbox'.

Outbox

To see a log for outgoing messages, open the menu and go to 'Outbox'.

Failed

To see a log for failed messages, open the menu and go to 'Failed'.

Write New

To write a new SMS, open the menu and go to 'Write New'.

Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.

Enter the phone number you wish to send your SMS to in the 'To' field. Pleas note that international prefix is mandatory.

Write your message in the 'Message' field.

When you have finished, click 'Send'.

Time Zone Settings

Open the menu and go to 'Time Zone Settings'.

The NTP & Time Zone Settings is by default set to enable external NTP.

For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.

To change your time zone, choose a time zone from the 'Time Zone' drop down menu.

Click 'Save' to change your settings.

Tools

Open the menu and go to 'Modem Settings'.

Shell

Use 'in browser' shell to change advanced settings.

Use with caution! Please note that if you make any changes without consulting us first, support will be charged accordingly with our hourly rate.

Root Settings

Change of root password require putty.exe. Default root password can be requested from inlogic.

Use Putty.exe to connect to Inlogic Gateway, run command (sudo passwd root) and follow the instructions on screen.

Additional information

Additional information about the product, users, and programs used in the tutorial.

Usernames and passwords

SSH Clients

A list of SSH Clients
Program name	URL
PuTTy	https://www.putty.org/

Open source FTP Client

A list of FTP clients
Program name	URL
WinSCP	https://winscp.net/eng/index.php
FileZilla	https://filezilla-project.org/

FAQ

Linux commands

Update ubuntu

sudo apt-get update -y
sudo apt-get upgrade -y

Update inLogic files and Database from command line

rm -rf /mnt/Update/update
wget --no-check-certificate https://downloads.inlogic.dk/downloads/inlogicgatewaymodem/Update.zip -O /mnt/Update/Update.zip
unzip /mnt/Update/Update.zip -d /mnt/Update/update
chmod 777 /mnt/Update/update/mnt/flash/root/updateservice/update.sh
/mnt/Update/update/mnt/flash/root/updateservice/update.sh

Commands

Commands shows Status of Apache (systemctl status apache2.service)
update system ( apt-get udate apt-get update)

Update/Install USB modeswitch

sudo wget https://www.draisberghof.de/usb_modeswitch/usb-modeswitch-2.6.0.tar.bz2 -O /tmp/usb-modeswitch-2.6.0.tar.bz2
sudo tar xvf /tmp/usb-modeswitch-2.6.0.tar.bz2 -C /tmp
sudo wget https://downloads.inlogic.dk/downloads/inlogicgatewaymodem/usb_modeswitch/usb_modeswitch_dispatcher.tcl -O /tmp/usb-modeswitch-2.6.0/usb_modeswitch_dispatcher.tcl
cd /tmp/usb-modeswitch-2.6.0
make;make install

Update ubuntu from 18 to 20

Use default answers when running these commands.

sudo sed -i 's/bionic/focal/g' /etc/apt/sources.list
sudo sed -i 's/bionic/focal/g' /etc/apt/sources.list.d/odroid.list
sudo apt-get update -y
sudo apt-get upgrade -y
sudo apt-get dist-upgrade -y

How to change IP settings

nano /etc/netplan/01-netconf.yaml
reboot

Logs

Log viewers

tail
tail -f (this is similar to using cmtrace in windows)
nano
vim

Log files

/var/log/smstools/smsd.log
/var/log/syslog
/var/log/mysql/error.log
/var/log/apache2/error.log

See USB devices

lsusb

See Apache error logs

inlapache

Rest API

Theres a REST API to use, to send messages from the inLogic SMS Gateway.

Send SMS

Title
URL	source/send_sms.php
Method	POST
URL Parameters	Username Password To Message
Success Response	200 - Success Returns ID of send SMS
Error Response	401 - Unauthorized
Error Resposne	403 - Forbidden
Error Response	500 - Internal server error
Sample Request	source/send_sms.php?username=smsuser&pwd=testpassword123&from=ums&to=22446688&message=Dette er en test besked
Notes

Example

curl -X POST https://modem.ums.dk/source/send_sms.php?username=<USERNAME>&pwd=<PASSWORD>&from=ums&to=<RECIEPIENT>&message=<MESSAGE>

Check SMS Status

Title
URL	webservice/getstatus.php
Method	POST
URL Parameters	Username Password ID
Success Response	200 - Success Returns status of send SMS ScheduledToSend = -1 OK = 0 OK_WithError = 1 InUMSQueue = 2 InModemQueue = 3 Failed = 4 IDNotFound = 5 SentViaMail = 100 FailedSendingViaMail = 101
Error Response	401 - Unauthorized
Error Resposne	403 - Forbidden
Error Response	500 - Internal server error
Sample Request	webservice/getstatus.php?=smsuser&pwd=testpassword123&id=1
Notes

Example

curl -X POST https://modem.ums.dk/webservice/getstatus.php?username=<USERNAME>&pwd=<PASSWORD>&id=<ID>

Deleting the SMS queue

Locate the "mnt/flash/spool/all#" and use the "rm *" command to purge everything within the folder.

Updating from 20.04 or lower

Updating your SMS modem from Ubuntu 20.04 or lower might result in the following message: "No new release found"

This is fixed by replacing the text in /etc/apt/sources.list.d/odroid.list using WinSCP with the follwing:

deb http://ports.ubuntu.com/ubuntu-ports/ jammy main universe restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy main universe restricted
deb http://ports.ubuntu.com/ubuntu-ports/ jammy-updates main universe restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy-updates main universe restricted
deb http://ports.ubuntu.com/ubuntu-ports/ jammy-backports main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy-backports main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ jammy-security main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy-security main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ jammy-security universe
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy-security universe
deb http://ports.ubuntu.com/ubuntu-ports/ jammy-security multiverse
deb-src http://ports.ubuntu.com/ubuntu-ports/ jammy-security multiverse

And replace the text in /etc/apt/sources.list.d/odroid.list with the following:

deb http://deb.odroid.in/5422-s/ jammy main

Certificate not updating when uploading new certificate

Some certificate providers give out certificates which the Ubuntu modem will reject, because it uses legacy protocols.

This can sometimes be avoided if you install the certificate on your local machine, and then export it again with TripleDES encryption.

@@ Line 23: / Line 23: @@
 |443
 |HTTPS access
-|-
-|3306
-|Database access
 |}
@@ Line 167: / Line 164: @@
 [[File:Modem Settings Shell.png|none|thumb|1240x1240px]]
 ===Root Settings===
-Change of root password requires login to shell. Default root password is 'odroid'.
+Change of root password require putty.exe. Default root password can be requested from inlogic.
-Login to shell, run password command and follow the instructions on screen.
+Use Putty.exe to connect to Inlogic Gateway, run command ''(sudo passwd root'') and follow the instructions on screen.
 [[File:Modem Settings Root.png|none|thumb|1240x1240px]]
@@ Line 175: / Line 172: @@
 Additional information about the product, users, and programs used in the tutorial.
 ====Usernames and passwords====
-{| class="wikitable"
-|+A list of username and passwords
-!Username
-!Password
-!Description
-|-
-|admin
-|admin
-|Admin user
-|-
-|sendsms
-|sendsms
-|Only allowed to send SMS
-|-
-|root
-|odroid
-|Root user, main system user
-|}
 ====SSH Clients====
 {| class="wikitable"
@@ Line 218: / Line 197: @@
 ===Linux commands===
-====Update from command line====
+==== Update ubuntu ====
+ sudo apt-get update -y
+ sudo apt-get upgrade -y
+====Update inLogic files and Database from command line====
   rm -rf /mnt/Update/update
-  <nowiki>wget https://downloads.inlogic.dk/inlogicgatewaymodem/Update.zip -O /mnt/Update/Update.zip --no-check-certificate</nowiki>
+  wget --no-check-certificate <nowiki>https://downloads.inlogic.dk/downloads/inlogicgatewaymodem/Update.zip</nowiki> -O /mnt/Update/Update.zip
   unzip /mnt/Update/Update.zip -d /mnt/Update/update
   chmod 777 /mnt/Update/update/mnt/flash/root/updateservice/update.sh
@@ Line 230: / Line 214: @@
 *Commands shows Status of Apache (systemctl status apache2.service)
 *update system ( apt-get udate  apt-get update)
+====Update/Install USB modeswitch====
+ sudo wget <nowiki>https://www.draisberghof.de/usb_modeswitch/usb-modeswitch-2.6.0.tar.bz2</nowiki> -O /tmp/usb-modeswitch-2.6.0.tar.bz2
+ sudo tar xvf /tmp/usb-modeswitch-2.6.0.tar.bz2 -C /tmp
+ sudo wget <nowiki>https://downloads.inlogic.dk/downloads/inlogicgatewaymodem/usb_modeswitch/usb_modeswitch_dispatcher.tcl</nowiki> -O /tmp/usb-modeswitch-2.6.0/usb_modeswitch_dispatcher.tcl
+ cd /tmp/usb-modeswitch-2.6.0
+ make;make install
+====Update ubuntu from 18 to 20====
+Use default answers when running these commands.
+ sudo sed -i 's/bionic/focal/g' /etc/apt/sources.list
+ sudo sed -i 's/bionic/focal/g' /etc/apt/sources.list.d/odroid.list
+ sudo apt-get update -y
+ sudo apt-get upgrade -y
+ sudo apt-get dist-upgrade -y
 ====How to change IP settings====
-*nano /etc/network/interfaces.d/eth0
+*nano /etc/netplan/01-netconf.yaml
-*nano /etc/resolv.conf
 *reboot
@@ Line 256: / Line 254: @@
 *lsusb
+==== See Apache error logs ====
+* inlapache
 ==Rest API==
@@ Line 362: / Line 364: @@
 Example
   curl -X POST https://modem.ums.dk/webservice/getstatus.php?username=&#x3C;USERNAME&#x3E;&pwd=&#x3C;PASSWORD&#x3E;&id=&#x3C;ID>
+==Deleting the SMS queue==
+Locate the "mnt/flash/spool/all#" and use the "rm *" command to purge everything within the folder.
+== Updating from 20.04 or lower ==
+Updating your SMS modem from Ubuntu 20.04 or lower might result in the following message: "No new release found"
+This is fixed by replacing the text in /etc/apt/sources.list.d/odroid.list using WinSCP with the follwing:<blockquote>deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy main universe restricted
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy main universe restricted
+deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-updates main universe restricted
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-updates main universe restricted
+deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-backports main restricted
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-backports main restricted
+deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security main restricted
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security main restricted
+deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security universe
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security universe
+deb <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security multiverse
+deb-src <nowiki>http://ports.ubuntu.com/ubuntu-ports/</nowiki> jammy-security multiverse</blockquote>And replace the text in /etc/apt/sources.list.d/odroid.list with the following:<blockquote>deb <nowiki>http://deb.odroid.in/5422-s/</nowiki> jammy main</blockquote>
+== Certificate not updating when uploading new certificate ==
+Some certificate providers give out certificates which the Ubuntu modem will reject, because it uses legacy protocols.
+This can sometimes be avoided if you install the certificate on your local machine, and then export it again with TripleDES encryption.

InLogic SMS Gateway: Difference between revisions

Latest revision as of 07:17, 23 April 2024

Important

Hardware Compatibility List

Network Port Openings

TCP port openings from server to gateway. TCP port opening where UMS sms sever service run.

TCP port openings from gateway to server.

Prepare Modem

System Login

Main Page

Network Configuration

Modem Settings

Hostname and Frontend Settings

Hostname

Frontend

Certificate Settings (https)

User Settings

Control Panel

SMS

Inbox

Outbox

Failed

Write New

Time Zone Settings

Tools

Shell

Root Settings

Additional information

Usernames and passwords

SSH Clients

Open source FTP Client

FAQ

Linux commands

Update ubuntu

Update inLogic files and Database from command line

Update/Install USB modeswitch

Update ubuntu from 18 to 20

How to change IP settings

Logs

Log viewers

Log files

See USB devices

See Apache error logs

Rest API

Send SMS

Check SMS Status

Deleting the SMS queue

Updating from 20.04 or lower

Certificate not updating when uploading new certificate

Navigation menu

Search