Foxbox: Difference between revisions

From UmsWiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
Khm (talk | contribs)
Bureaucrats, engineering, Administrators
132 edits
No edit summary
 
(26 intermediate revisions by 4 users not shown)
Line 1: Line 1:
UMS SMS Modem..
<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote>[[File:Foxbox.png|none|thumb|286x286px]]
[[File:Foxbox.png|none|thumb]]


== Prepare Modem ==
==Network Port Openings==
 
====TCP port openings from server to modem.====
{| class="wikitable"
!Port
!Usage
|-
|22
|SSH access
|-
|80
|HTTP access
|-
|443
|HTTPS access
|-
|3306
|Database access
|}
 
====TCP port openings from modem to server.====
{| class="wikitable"
!Port
!Usage
|-
|80
|HTTP access
|-
|443
|HTTPS access
|}
 
==Prepare Modem==
{|
{|
![[File:Foxbox_OpenModem.png|alt=Inside Foxbox|none|thumb]]
![[File:Foxbox_OpenModem.png|alt=Inside Foxbox|none|thumb]]
!Insert sim cards (sim2 cardholder is on the backside of board)
!Insert sim cards (sim2 cardholder is on the backside of the board)
01 – Plug-in antenna connectors
01 – Plug-in antenna connectors


Line 12: Line 43:
03 – Plug-in power cable
03 – Plug-in power cable


04 – Optional Serial Cable
04 – Optional serial cable


05 – Optional USB extention
05 – Optional USB extention
Line 34: Line 65:
|}
|}


== System Login ==
==System Login==
Once modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), browse to <nowiki>http://192.168.1.2</nowiki> and login with USERNAME: admin and PASSWORD: admin
Once the modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), open a browser and go to <nowiki>http://192.168.1.2</nowiki> and click login in the upper right corner.
[[File:Foxbox Login.png|none|1180x1180px|thumb]]
A login box will pop up. Login with username 'admin' and password 'admin'.
[[File:Foxbox Login Modal.png|none|510x510px|thumb]]
 
==Main Page==
After logging in, the system info page appears. This page shows status for the modem.[[File:Foxbox index menu closed.png|none|1300x1300px|thumb]]Click on [[File:Foxbox menu button.png|frameless|23x23px]] to open the menu.
[[File:Foxbox index menu open.png|none|1300x1300px|thumb]]
 
==Network Configuration==
Go to the menu and click 'Network Config'.
 
Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and [[Foxbox#Reboot|reboot]] the modem.
[[File:Foxbox Network Config.png|none|1300x1300px|thumb]]
 
==Modem Settings==
 
===Frontend and Hostname settings===
 
====Frontend====
Open the menu and go to 'inLogic Modem Settings'.
 
Change the 'FrontEnd Address' to fit your configuration.
 
Scroll down and click 'Save'.
[[File:Foxbox Frontend inLogic Modem Settings.png|none|1300x1300px|thumb]]
 
===Hostname===
Open the menu and go to 'inLogic Modem Settings'.
 
Set the modem hostname as 'FQDN'.
 
Scroll down and click 'Save'. The modem will restart.
[[File:Foxbox Hostname inLogic Modem Settings.png|none|1300x1300px|thumb]]
 
====User Settings====
Open the menu and go to 'inLogic Modem Settings' and scroll down to 'User Settings'.
 
To change default admin user password (default 'admin'), write the new password in the Password box, just below admin username.
 
To change default sendsms user password (default 'sendsms'), write the new password in the Password box just below sendsms username.
 
Click 'Save' to confirm password change.
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]
 
===SIM Settings===
Open the menu and go to 'inLogic Modem Settings' and scroll down to 'SIM Settings'.
 
Do not enable pin settings for any modem. It does not work. All ping codes must be removed from the cards.
 
Click 'Save' and click [[Foxbox#Reboot|Reboot]].
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]
 
==Control Panel==
Open the menu and go to 'Control Panel'.
 
Here, you can see staus, as well as turn on and off, the SMS Engine.[[File:Foxbox_Control_Panel.png|none|1300x1300px|thumb]]
 
==SMS==
 
===Inbox===
To see a log for incoming messages, open the menu and go to 'Inbox'.
[[File:Foxbox Inbox.png|none|1300x1300px|thumb]]
 
===Outbox===
To see a log for outgoing messages, open the menu and go to 'Outbox'.
[[File:Foxbox Outbox.png|none|1300x1300px|thumb]]
===Write New===
To write a new SMS, open the menu and go to 'Write New'.


Click “Continue to this website (not recommended)”
Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.


== Main Page ==
Enter the phone number you wish to send your SMS to in the 'To' field. Please note that international prefix is mandatory.
After login the system info page appears.


Shows status of the modem.
Write your message in the 'Message' field.
[[File:Foxbox index menu closed.png|none|thumb]]Click the [[File:Foxbox menu button.png|frameless|23x23px]] to open menu
[[File:Foxbox index menu open.png|none|thumb]]


== Network Configuration ==
When you have finished, click 'Send'.[[File:Foxbox Write New.png|none|1300x1300px|thumb]]
Click “Network Config” in menu


Change IP settings and press “Save Configuration”, [:File://file.inlogic.dk/Salg/Brugermanualer/NewSheets/Moduler/FoxBox/Slutbruger manual/EndUser.docx# Reboot reboot] modem on “inLogic Modem Settings” page.
==Time Zone Settings==
[[File:Foxbox Network Config.png|none|thumb]]
Open the menu and go to 'Time Zone Settings'.


== Modem Settings ==
The NTP & Time Zone Settings is by default set to enable external NTP.


=== Frontend and Hostname Settings ===
For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.


==== Hostname ====
To change your time zone, choose a time zone from the 'Time Zone' drop down menu.
Click “inLogic Modem Settings”


Set Modem Hostname as FQDN.
Click 'Save' to change your settings.[[File:Foxbox Time Zone Settings.png|none|1300x1300px|thumb]]


Scroll down and Click “Save” and the modem will restart.
==Tools==
[[File:Foxbox Hostname inLogic Modem Settings.png|none|thumb]]
Open the menu and go to 'Modem Settings'.
===Shell===
Use 'in browser' shell to change advanced settings.


==== Frontend ====
<u style="color:red;">Use with caution!</u> Please note that if you make any changes without consulting inLogic first, support will be charged accordingly to our hourly rate.[[File:Foxbox Shell inLogic Modem Settings.png|none|1300x1300px|thumb]]
Click “inLogic Modem Settings”


Change FrontEnd Address to fit your configuration.
===Reboot===
In order to reboot the modem, click on the 'Reboot Modem' button.
[[File:Foxbox Reboot inLogic Modem Settings.png|none|1300x1300px|thumb]]


Scroll down and Click “Save”
===Root Settings===
[[File:Foxbox Frontend inLogic Modem Settings.png|none|thumb]]
Change of root password requires login to shell. Default root password is 'odroid'.


=== Certificate(https) Settings ===
Login to shell, run password command and follow the instructions on screen.
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings”


Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines).
This is not possible from the web interface.[[File:Foxbox Root inLogic Modem Settings.png|none|1300x1300px|thumb]]


Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart.
==Update certificate==
[[File:Foxbox Certificate inLogic Modem Settings.png|none|thumb]]


=== User Settings ===
===Step one - creating a certificate.pem file===
In the menu click “inLogic Modem Settings” and scroll down to “User Settings”
Make sure you have the certificate as a­ . crt or .pem file. You should have received a certificate with a private key from your provider. Some providers send two or more files containing this.


To change default admin user password (default “admin”), write new password in Password box just below admin username.
To handle the certificate, we need to extract the information from the certificate and private key and combine these two into one certificate.


To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.
If you use notepad to open the certificate (recommended), you will see this:
-----BEGIN CERTIFICATE-----
Lots of data here...
-----END CERTIFICATE-----
When you open the private key certificate, you should see this:
-----BEGIN RSA PRIVATE KEY-----
Lots of data here...
-----END RSA PRIVATE KEY-----
Or this:
-----BEGIN PRIVATE KEY-----
Lots of data here...
-----END PRIVATE KEY-----
Start by creating a new .txt file in a folder and then copy the content of the private key into the new .txt file.


Click “Save” to confirm password change.
Now, open the certificate file, copy the content and paste it in after the private key.
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|thumb]]


=== MySQL Settings ===
Your file should look like this:
In the menu click “inLogic Modem Settings” and scroll down to “MySQL Settings”
-----BEGIN PRIVATE KEY-----
MIIEvQIBAD...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIICsjCCAZqgAw...
-----END CERTIFICATE-----
Save the file by selecting all file types instead of .txt and name the file 'certificate.pem'.


To change default umsservice user password (default “admin”), write new password in Password box just below umsservice.
===Step two - installation===
To install the certificate, you will need FTP software (you can freely select the FTP software you prefer).


Scroll down and click “Save” to confirm password change.
Now, connect to the Foxbox using the server's IP address. This example uses 'FileZilla'.
[[File:Foxbox MYSQL inLogic Modem Settings.png|none|thumb]]
[[File:Filezilla_foxbox_update_certificate.jpg|none|thumb|839x839px]]


=== SIM Settings ===
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings”


Enable / Disable PIN for modems and set PIN if needed.
When the client has connected, you will have the folder view where you can navigate to '/etc/sms/scripts'. You can use the folder view to navigate back to the path or you can simply paste the path into the remote site bar and press enter.


Click “Save”. After save Click [:File://file.inlogic.dk/Salg/Brugermanualer/NewSheets/Moduler/FoxBox/Slutbruger manual/EndUser.docx# Reboot Reboot].
Now, you should be able to locate the certificate.pem file inside the folder.
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|thumb]]


== Control Panel ==
Continue by navigating the local file view to the new certificate that we created in step 1 and upload it to the Foxbox.
In the menu click "Control Panel".


Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
===Steep three===
[[File:Foxbox Control Panel.png|none|thumb]]
Open or download the SSH client program. This example uses 'putty'.


== SMS ==
When you have the ssh client open, please connect using the Foxbox server's IP address.


=== Inbox ===
When successfully connected, please use the root user to login, as it is the only user with permissions to restart the apache server.
Click “Inbox” in menu to see a log of incoming messages.
[[File:Foxbox Inbox.png|none|thumb]]


=== Outbox ===
In order to restart the apache server, please type:
Click “Outbox” in menu to see a log of outgoing messages.
/etc/init.d/apache2 restart
[[File:Foxbox Outbox.png|none|thumb]]
Press enter.


=== Write New ===
When the service is restarted successfully, 'OK' will appear in green text. If the service was unsuccessful, the error message will appear in red text.
Click “Write New” in menu to see a log of outgoing messages.


<span style="background-color: #FFFF00">Choose what modem to send from or leave as is to choose first free modem.</span>
After successfully restarting, open the Foxbox url and verify that the certificate has been changed and is valid.


<span style="background-color: #0000FF">Insert mobile phone number to send to. (international prefix is mandatory)</span>
===Additional information===
Additional information about the product, users, and programs used in the tutorial.
 
====Usernames and passwords====
{| class="wikitable"
|+A list of username and passwords
!Username
!Password
!Description
|-
|admin
|admin
|Admin user
|-
|sendSMS
|sendSMS
|Only allowed to send SMS
|-
|root
|foxbox
|Root user, main system user
|-
|foxbox
|foxbox
|Foxbox user is scaled down root user
|}


<span style="background-color: #00FF00">Write text to send.</span>
====SSH Clients====
{| class="wikitable"
|+A list of SSH Clients
!Program name
!URL
|-
|PuTTy
|<nowiki>https://www.putty.org/</nowiki>
|}


Click “Send” to continue.
====Open source FTP Client====
[[File:Foxbox Write New.png|none|thumb]]
{| class="wikitable"
|+A list of FTP clients
!Program name
!URL
|-
|WinSCP
|<nowiki>https://winscp.net/eng/index.php</nowiki>
|-
|FileZilla
|<nowiki>https://filezilla-project.org/</nowiki>
|-
|
|
|}
__FORCETOC__
__FORCETOC__

Latest revision as of 09:59, 30 January 2019

UMS SMS Modem.. ( Certificate is required for use of Modem )

Network Port Openings

TCP port openings from server to modem.

Port Usage
22 SSH access
80 HTTP access
443 HTTPS access
3306 Database access

TCP port openings from modem to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

Inside Foxbox
 Insert sim cards (sim2 cardholder is on the backside of the board)

01 – Plug-in antenna connectors

02 – Plug-in Ethernet cable

03 – Plug-in power cable

04 – Optional serial cable

05 – Optional USB extention

System Login

Once the modem is prepared and booted (the modem will make a single beep when booted), open a browser and go to http://192.168.1.2 and click login in the upper right corner.

A login box will pop up. Login with username 'admin' and password 'admin'.

Main Page

After logging in, the system info page appears. This page shows status for the modem.

Click on to open the menu.

Network Configuration

Go to the menu and click 'Network Config'.

Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and reboot the modem.

Modem Settings

Frontend and Hostname settings

Frontend

Open the menu and go to 'inLogic Modem Settings'.

Change the 'FrontEnd Address' to fit your configuration.

Scroll down and click 'Save'.

Hostname

Open the menu and go to 'inLogic Modem Settings'.

Set the modem hostname as 'FQDN'.

Scroll down and click 'Save'. The modem will restart.

User Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'User Settings'.

To change default admin user password (default 'admin'), write the new password in the Password box, just below admin username.

To change default sendsms user password (default 'sendsms'), write the new password in the Password box just below sendsms username.

Click 'Save' to confirm password change.

SIM Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'SIM Settings'.

Do not enable pin settings for any modem. It does not work. All ping codes must be removed from the cards.

Click 'Save' and click Reboot.

Control Panel

Open the menu and go to 'Control Panel'.

Here, you can see staus, as well as turn on and off, the SMS Engine.

SMS

Inbox

To see a log for incoming messages, open the menu and go to 'Inbox'.

Outbox

To see a log for outgoing messages, open the menu and go to 'Outbox'.

Write New

To write a new SMS, open the menu and go to 'Write New'.

Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.

Enter the phone number you wish to send your SMS to in the 'To' field. Please note that international prefix is mandatory.

Write your message in the 'Message' field.

When you have finished, click 'Send'.

Time Zone Settings

Open the menu and go to 'Time Zone Settings'.

The NTP & Time Zone Settings is by default set to enable external NTP.

For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.

To change your time zone, choose a time zone from the 'Time Zone' drop down menu.

Click 'Save' to change your settings.

Tools

Open the menu and go to 'Modem Settings'.

Shell

Use 'in browser' shell to change advanced settings.

Use with caution! Please note that if you make any changes without consulting inLogic first, support will be charged accordingly to our hourly rate.

Reboot

In order to reboot the modem, click on the 'Reboot Modem' button.

Root Settings

Change of root password requires login to shell. Default root password is 'odroid'.

Login to shell, run password command and follow the instructions on screen.

This is not possible from the web interface.

Update certificate

Step one - creating a certificate.pem file

Make sure you have the certificate as a­ . crt or .pem file. You should have received a certificate with a private key from your provider. Some providers send two or more files containing this.

To handle the certificate, we need to extract the information from the certificate and private key and combine these two into one certificate.

If you use notepad to open the certificate (recommended), you will see this: 

-----BEGIN CERTIFICATE----- 
Lots of data here...
-----END CERTIFICATE-----

When you open the private key certificate, you should see this: 

-----BEGIN RSA PRIVATE KEY----- 
Lots of data here...
-----END RSA PRIVATE KEY-----

Or this: 

-----BEGIN PRIVATE KEY----- 
Lots of data here...
-----END PRIVATE KEY-----

Start by creating a new .txt file in a folder and then copy the content of the private key into the new .txt file.

Now, open the certificate file, copy the content and paste it in after the private key.

Your file should look like this: 

-----BEGIN PRIVATE KEY-----
MIIEvQIBAD...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIICsjCCAZqgAw...
-----END CERTIFICATE-----

Save the file by selecting all file types instead of .txt and name the file 'certificate.pem'.

Step two - installation

To install the certificate, you will need FTP software (you can freely select the FTP software you prefer).

Now, connect to the Foxbox using the server's IP address. This example uses 'FileZilla'.


When the client has connected, you will have the folder view where you can navigate to '/etc/sms/scripts'. You can use the folder view to navigate back to the path or you can simply paste the path into the remote site bar and press enter.

Now, you should be able to locate the certificate.pem file inside the folder.

Continue by navigating the local file view to the new certificate that we created in step 1 and upload it to the Foxbox.

Steep three

Open or download the SSH client program. This example uses 'putty'.

When you have the ssh client open, please connect using the Foxbox server's IP address.

When successfully connected, please use the root user to login, as it is the only user with permissions to restart the apache server.

In order to restart the apache server, please type: 

/etc/init.d/apache2 restart

Press enter.

When the service is restarted successfully, 'OK' will appear in green text. If the service was unsuccessful, the error message will appear in red text.

After successfully restarting, open the Foxbox url and verify that the certificate has been changed and is valid.

Additional information

Additional information about the product, users, and programs used in the tutorial.

Usernames and passwords

A list of username and passwords
Username Password Description
admin admin Admin user
sendSMS sendSMS Only allowed to send SMS
root foxbox Root user, main system user
foxbox foxbox Foxbox user is scaled down root user

SSH Clients

A list of SSH Clients
Program name URL
PuTTy https://www.putty.org/

Open source FTP Client

A list of FTP clients
Program name URL
WinSCP https://winscp.net/eng/index.php
FileZilla https://filezilla-project.org/
Retrieved from "http://wiki.inlogic.dk/index.php?title=Foxbox&oldid=2396"