View source for Configurator/SMS Server

=Choose the desired SMS Gateway solution=

==Stand alone==
This is a hardware box delivered by inLogic.

[[InLogic SMS Gateway]][[File:SMS Server StandAlone inLogic Modem.jpg|none|thumb|570x570px]]
====Gateway address====
Enter the full DNS name of the inLogic gateway

====User name====
This cannot be changed.

====Password====
Enter the password of a sendsms user. This password can be change on the gateway

==Gateway server==
This is a server program that can combine more inLogic gateways.[[File:SMS Server GateWayServer.jpg|none|thumb|570x570px]]

====Gateway address====
Enter the full DNS name of the gateway server

====User name====
Enter the username for the webservices. Default is "WebserviceUser" but can be changed.

====Password====
Enter the password for the user. This has to be setup at first install of the GateWay server program. The password generated at install is random.

==SMS Provider==
This option allows you to choose between a list of internet SMS providers that UMS integrates with.

===[https://gatewayapi.eu/ gatewayapi.eu]===

==== Prerequisites ====
Remember to create an account first. (in Danish)

# Opret en konto hos GatewayAPI.eu  (Det er vigtigt I vælger .EU ved oprettelse)
# Kontakter deres support via Chat-funktionen og meddeler at I er '''Inlogic kunde''' (Reference udløser rabatten pr sms) - Support er på dansk, selv om chatbot er engelsk…
# Bed også GatewayAPI-support oprette jer som '''faktura-kunde''', med mindre I vil styre udgiften med betalingskort.
# Hvis I skal benytte indgående SMS funktion, vil et SMS-nummer også være fordelagtigt - Dette kan også bestilles via Keywords & Numbers på siden

==== SMS Server Settings ====
[[File:SMS Server SMSProvider gatewayapi.jpg|none|thumb|570x570px]]

==== Callback URL ====
Enter the URL of the UMS web server. This must be running https.

This is used for status updates when sending SMS from UMS.

==== Region ====
Select the region to COM or EU.

==== Sender ====
Enter a phone number or 11 characters. This is what is displayed on the phone when receiving the SMS.

==== API Token ====
Used to authenticate when sending SMS to users.

It is found on the gatewayapi site under API->API keys->Get Key/Token

==== Keyword ====
This is used when your using a keyword in gatewayapi.com to identify where to send incoming SMS from users. This will remove the keyword at the start of the SMS.

This can be blank if you don't want to remove the keyword from the SMS or if your using a virtual number.

This is only used when using short codes instead of virtual numbers.

==== Configuration settings at gatewayapi ====
Setup a REST web hook to catch incoming SMS and send them to UMS. This is setup under API->Web Hooks->Rest->Add new

The web hook URL must be:[https://044e-87-48-162-154.ngrok.io/SMSServer/gatewayapi.asmx/Incoming https://<Public DNS>/SMSServer/gatewayapi.asmx/Incoming]

Change the public DNS to your UMS frontend servers URL.

Under keywords for the web hook assign the phone number and/or the keyword.

==== IP Filter notification ====
<nowiki>**</nowiki> If you filter IPs, note that we will call your webhook from the '''IPs 35.241.147.191 and 35.233.1.105'''. In the future we may add IPs.

==== URL Whitelisting ====
To make SMS password-reset work, the URL of UMS.yourdomain.dk needs to be whitelisted at GatewayAPI. This is done in their API settings.

=== [https://www.sinch.com/ Sinch.com] ===
Remember to create an account first.
[[File:SMS Server SMSProvider Sinch.jpg|none|thumb|500x500px]]

==== Callback URL ====
Enter the URL of the UMS web server. This must be running https.

This is used for status updates when sending SMS from UMS.

====Sender====
Enter a phone number or 11 characters. This is what is displayed on the phone when receiving the SMS.

====Service plan id====
Used to authenticate when sending SMS to users.

This can be found https://dashboard.sinch.com/sms/api/rest

====API Token====
Used to authenticate when sending SMS to users.

This can be found https://dashboard.sinch.com/sms/api/rest

====Keyword====
This is used when your using a keyword in Sinch.com to identify where to send incoming SMS from users. This will remove the keyword at the start of the SMS.

This can be blank if you don't want to remove the keyword from the SMS or if your using a virtual number.

This is only used when using short codes instead of virtual numbers.

====Configuration settings at Sinch.com====
Setup a Callback URL for the virtual number to catch incoming SMS and send them to UMS. This is setup here https://dashboard.sinch.com/numbers/your-numbers/numbers. Choose the correct virtual number.

The web hook URL must be:[https://044e-87-48-162-154.ngrok.io/SMSServer/Sinch.asmx/Incoming https://<Public DNS>/SMSServer/Sinch.asmx/Incoming]

Change the public DNS to your UMS frontend servers URL.

=Default settings=
[[File:SMS Server Settings.jpg|none|thumb|518x518px]]

====Keep SMS log====
Set how many days to keep SMS entries in the database.

====Resend====
Set how many times the gateway will try to send the SMS, before sending the text in an e-mail.

====Country code====
This is used to identify the country where the SIM cards are registered.

====Max reply time====
Set the number of minutes the user has to answer a received mail.

====Local number length====
Define how long the phone numbers for the country code is.

====SMS Start time====
Choose time of day from when it is possible to send messages using UMS.

====SMS end time====
Choose time of day when it is no longer possible to send messages using UMS.