UMS SMS Modem.. ( Certificate is required for use of Modem )
- 1 Network Port Openings
- 2 Prepare Modem
- 3 System Login
- 4 Main Page
- 5 Network Configuration
- 6 Modem Settings
- 7 Control Panel
- 8 SMS
- 9 Time Zone Settings
- 10 Tools
Network Port Openings
TCP port openings from server to modem.
TCP port openings from modem to server.
|Insert sim cards (sim2 cardholder is on the backside of board)
01 – Plug-in antenna connectors
02 – Plug-in Ethernet cable
03 – Plug-in power cable
04 – Optional Serial Cable
05 – Optional USB extention
Once modem is prepared and booted (the modem will make a single beep when booted), browse to http://192.168.1.2 and click login in upper right corner.
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin
After login the system info page appears.
Shows status of the modem.
Click “Network Config” in menu
Change IP settings and press “Save Configuration”, Reboot modem on “inLogic Modem Settings” page.
Frontend and Hostname Settings
Click “inLogic Modem Settings”
Set Modem Hostname as FQDN.
Scroll down and Click “Save” and the modem will restart.
Click “inLogic Modem Settings”
Change FrontEnd Address to fit your configuration.
Scroll down and Click “Save”
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings”
Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines).
Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart.
In the menu click “inLogic Modem Settings” and scroll down to “User Settings”
To change default admin user password (default “admin”), write new password in Password box just below admin username.
To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.
Click “Save” to confirm password change.
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings”
Enable / Disable PIN for modems and set PIN if needed.
Click “Save”. After save Click Reboot.
In the menu click "Control Panel".
Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
Click “Inbox” in menu to see a log of incoming messages.
Click “Outbox” in menu to see a log of outgoing messages.
Click “Write New” in menu to see a log of outgoing messages.
Choose what modem to send from or leave as is to choose first free modem.
Insert mobile phone number to send to. (international prefix is mandatory)
Write text to send.
Click “Send” to continue.
Time Zone Settings
Time zone and NTP server settings
For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe)
For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox.
To set your Time Zone, click Time Zone dropdown and choose your zone.
Click Save to change configuration.
Click "inLogic Modem Settings" in menu and go to bottom of page.
In browser shell to change advanced settings (USE with caution)
Change of root password requires login to shell.
Login to shell, run passwd command and follow instructions on screen.