Difference between revisions of "Inlogicmodem"

From UmsWiki
Jump to: navigation, search
Line 153: Line 153:
Click “Send” to continue.
Click “Send” to continue.
[[File:Write New.png|none|thumb|1240x1240px]]
[[File:Write New guide.png|none|thumb|1240x1240px]]
== Time Zone Settings ==
== Time Zone Settings ==

Revision as of 01:19, 17 May 2018


Certificate is required for use of Modem

Network Port Openings

TCP port openings from server to modem.

Port Usage
22 SSH access
80 HTTP access
443 HTTPS access
3306 Database access

TCP port openings from modem to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

Inside Foxbox
Insert sim cards (sim2 cardholder is on the backside of board)

01 – Plug-in antenna connectors

02 – Plug-in Ethernet cable

03 – Plug-in power cable

04 – Optional Serial Cable

05 – Optional USB extention

System Login

Once modem is prepared and booted, browse to and click login in upper right corner.

Main Login button.png

Login box will popup, and here login with USERNAME: admin and PASSWORD: admin


Main Page

After login the system info page appears.

Shows status of the modem.


Click the Foxbox menu button.png to open menu

Main with menu.png

Network Configuration

Click “Network Config” in menu

Change IP settings and press “Save Configuration”, Reboot modem on “inLogic Modem Settings” page.

Network Config.png

Modem Settings

Frontend and Hostname Settings


Click “Modem Settings” in the menu.

Set Modem Hostname as FQDN.

Scroll down and Click “Save” and the modem will restart.

Modem Settings Hostname.png


Click “Modem Settings” in menu

Change FrontEnd Address to fit your configuration.

Scroll down and Click “Save”

Modem Settings Frontend.png

Certificate(https) Settings

Click “Modem Settings” in menu

Click "Choose File" and choose pfx certificate from your harddrive/USB stick/other media.

Enter pfx certificate password in "Certificate Password" box and click "Save".

Modem Settings Certificate.png

User Settings

In the menu click “Modem Settings” and scroll down to “User Settings”

To change default admin user password (default “admin”), write new password in Password box just below admin username.

To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.

Click “Save” to confirm password change.

Modem Settings User.png

Control Panel

In the menu click "Control Panel".

Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.

Control Panel.png



Click “Inbox” in menu to see a log of incoming messages.



Click “Outbox” in menu to see a log of outgoing messages.



Click “Failed” in menu to see a log of failed messages.


Write New

Click “Write New” in menu to see a log of outgoing messages.

Choose what modem to send from or leave as is to choose first free modem.

Insert mobile phone number to send to. (international prefix is mandatory)

Write text to send.

Click “Send” to continue.

Write New guide.png

Time Zone Settings

In the menu click "Time Zone Settings"

Time zone and NTP server settings

For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe)

For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox.

To set your Time Zone, click Time Zone dropdown and choose your zone.

Click Save to change configuration.

Time Zone Settings.png


Click "Modem Settings" in menu and go to bottom of page.


In browser shell to change advanced settings (use with caution)

Modem Settings Shell.png


Reboot modem.

Modem Settings Reboot.png

Root Settings

Change of root password requires login to shell. (default root password is "odroid")

Login to shell, run passwd command and follow instructions on screen.

Modem Settings Root.png