Difference between revisions of "Inlogicmodem"

From UmsWiki
Jump to: navigation, search
(jvi)
Line 1: Line 1:
<blockquote>UMS SMS Modem.. ( '''<u>Certificate is required for use of Modem</u>''' )</blockquote>[[File:Foxbox.png|none|thumb]]
+
== Important ==
 +
'''<u>Certificate is required for use of Modem</u>'''
  
 
== Network Port Openings ==
 
== Network Port Openings ==
Line 66: Line 67:
  
 
== System Login ==
 
== System Login ==
Once modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), browse to <nowiki>http://192.168.1.2</nowiki> and click login in upper right corner.
+
Once modem is [[#Prepare Modem|prepared]] and booted, browse to <nowiki>http://192.168.1.2</nowiki> and click login in upper right corner.
[[File:Foxbox Login.png|none|thumb]]
+
[[File:Main Login button.png|none|thumb|1240x1240px]]
 
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin
 
Login box will popup, and here login with USERNAME: admin and PASSWORD: admin
[[File:Foxbox Login Modal.png|none|thumb]]
+
[[File:Login.png|none|thumb|1240x1240px]]
  
 
== Main Page ==
 
== Main Page ==
Line 75: Line 76:
  
 
Shows status of the modem.
 
Shows status of the modem.
[[File:Foxbox index menu closed.png|none|thumb]]Click the [[File:Foxbox menu button.png|frameless|23x23px]] to open menu
+
[[File:Main.png|none|thumb|1240x1240px]]
[[File:Foxbox index menu open.png|none|thumb]]
+
Click the [[File:Foxbox menu button.png|frameless|23x23px]] to open menu
 +
[[File:Main with menu.png|none|thumb|1240x1240px]]
  
 
== Network Configuration ==
 
== Network Configuration ==
Line 82: Line 84:
  
 
Change IP settings and press “Save Configuration”, [[Foxbox#Reboot|Reboot]] modem on “inLogic Modem Settings” page.
 
Change IP settings and press “Save Configuration”, [[Foxbox#Reboot|Reboot]] modem on “inLogic Modem Settings” page.
[[File:Foxbox Network Config.png|none|thumb]]
+
[[File:Network Config.png|none|thumb|1240x1240px]]
  
 
== Modem Settings ==
 
== Modem Settings ==
Line 89: Line 91:
  
 
==== Hostname ====
 
==== Hostname ====
Click “inLogic Modem Settings”
+
Click “Modem Settings” in the menu.
  
 
Set Modem Hostname as FQDN.
 
Set Modem Hostname as FQDN.
  
 
Scroll down and Click “Save” and the modem will restart.
 
Scroll down and Click “Save” and the modem will restart.
[[File:Foxbox Hostname inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Hostname.png|none|thumb|1240x1240px]]
  
 
==== Frontend ====
 
==== Frontend ====
Click “inLogic Modem Settings”
+
Click “Modem Settings” in menu
  
 
Change FrontEnd Address to fit your configuration.
 
Change FrontEnd Address to fit your configuration.
  
 
Scroll down and Click “Save”
 
Scroll down and Click “Save”
[[File:Foxbox Frontend inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Frontend.png|none|thumb|1240x1240px]]
  
 
=== Certificate(https) Settings ===
 
=== Certificate(https) Settings ===
Click “inLogic Modem Settings” and scroll down to “Certificate(https) Settings”
+
Click “Modem Settings” in menu
  
Copy/Paste Certificate from .crt or .pem file into Certificate box (incl. the “-----BEGIN CERTIFICATE-----” and “-----END CERTIFICATE-----” lines).
+
Click "Choose File" and choose pfx certificate from your harddrive/USB stick/other media.
  
Copy/Paste Private key into Private key box (incl. the “-----BEGIN RSA PRIVATE KEY-----“ and “-----END RSA PRIVATE KEY-----” lines). Click “Save” and the modem will restart.
+
Enter pfx certificate password in "Certificate Password" box and click "Save".
[[File:Foxbox Certificate inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Certificate.png|none|thumb|1240x1240px]]
  
 
=== User Settings ===
 
=== User Settings ===
In the menu click “inLogic Modem Settings” and scroll down to “User Settings”
+
In the menu click “Modem Settings” and scroll down to “User Settings”
  
 
To change default admin user password (default “admin”), write new password in Password box just below admin username.
 
To change default admin user password (default “admin”), write new password in Password box just below admin username.
Line 120: Line 122:
  
 
Click “Save” to confirm password change.
 
Click “Save” to confirm password change.
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings User.png|none|thumb|1240x1240px]]
 
 
=== SIM Settings ===
 
In the menu click “inLogic Modem Settings” and scroll down to “SIM Settings”
 
 
 
Enable / Disable PIN for modems and set PIN if needed.
 
 
 
Click “Save”. After save Click [[Foxbox#Reboot|Reboot]].
 
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|thumb]]
 
  
 
== Control Panel ==
 
== Control Panel ==
Line 134: Line 128:
  
 
Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
 
Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.
[[File:Foxbox Control Panel.png|none|thumb]]
+
[[File:Control Panel.png|none|thumb|1240x1240px]]
  
 
== SMS ==
 
== SMS ==
Line 140: Line 134:
 
=== Inbox ===
 
=== Inbox ===
 
Click “Inbox” in menu to see a log of incoming messages.
 
Click “Inbox” in menu to see a log of incoming messages.
[[File:Foxbox Inbox.png|none|thumb]]
+
[[File:Inbox.png|none|thumb|1240x1240px]]
  
 
=== Outbox ===
 
=== Outbox ===
 
Click “Outbox” in menu to see a log of outgoing messages.
 
Click “Outbox” in menu to see a log of outgoing messages.
[[File:Foxbox Outbox.png|none|thumb]]
+
[[File:Outbox.png|none|thumb|1240x1240px]]
  
 +
=== Failed ===
 +
Click “Failed” in menu to see a log of failed messages.
 +
[[File:Failed.png|none|thumb|1240x1240px]]
 
=== Write New ===
 
=== Write New ===
 
Click “Write New” in menu to see a log of outgoing messages.
 
Click “Write New” in menu to see a log of outgoing messages.
Line 156: Line 153:
  
 
Click “Send” to continue.
 
Click “Send” to continue.
[[File:Foxbox Write New.png|none|thumb]]
+
[[File:Write New.png|none|thumb|1240x1240px]]
  
 
== Time Zone Settings ==
 
== Time Zone Settings ==
 +
In the menu click "Time Zone Settings"
 +
 
Time zone and NTP server settings
 
Time zone and NTP server settings
  
Line 168: Line 167:
  
 
Click Save to change configuration.
 
Click Save to change configuration.
[[File:Foxbox Time Zone Settings.png|none|thumb]]
+
[[File:Time Zone Settings.png|none|thumb|1240x1240px]]
  
 
== Tools ==
 
== Tools ==
Click "inLogic Modem Settings" in menu and go to bottom of page.
+
Click "Modem Settings" in menu and go to bottom of page.
  
 
=== Shell ===
 
=== Shell ===
In browser shell to change advanced settings (USE with caution)
+
In browser shell to change advanced settings (<u>use with caution</u>)
[[File:Foxbox Shell inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Shell.png|none|thumb|1240x1240px]]
  
 
=== Reboot ===
 
=== Reboot ===
 
Reboot modem.
 
Reboot modem.
[[File:Foxbox Reboot inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Reboot.png|none|thumb|1240x1240px]]
  
 
=== Root Settings ===
 
=== Root Settings ===
Line 185: Line 184:
  
 
Login to shell, run passwd command and follow instructions on screen.
 
Login to shell, run passwd command and follow instructions on screen.
[[File:Foxbox Root inLogic Modem Settings.png|none|thumb]]
+
[[File:Modem Settings Root.png|none|thumb|1240x1240px]]
 
__FORCETOC__
 
__FORCETOC__

Revision as of 01:06, 17 May 2018

Important

Certificate is required for use of Modem

Network Port Openings

TCP port openings from server to modem.

Port Usage
22 SSH access
80 HTTP access
443 HTTPS access
3306 Database access

TCP port openings from modem to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

Inside Foxbox
Insert sim cards (sim2 cardholder is on the backside of board)

01 – Plug-in antenna connectors

02 – Plug-in Ethernet cable

03 – Plug-in power cable

04 – Optional Serial Cable

05 – Optional USB extention

System Login

Once modem is prepared and booted, browse to http://192.168.1.2 and click login in upper right corner.

Main Login button.png

Login box will popup, and here login with USERNAME: admin and PASSWORD: admin

Login.png

Main Page

After login the system info page appears.

Shows status of the modem.

Main.png

Click the Foxbox menu button.png to open menu

Main with menu.png

Network Configuration

Click “Network Config” in menu

Change IP settings and press “Save Configuration”, Reboot modem on “inLogic Modem Settings” page.

Network Config.png

Modem Settings

Frontend and Hostname Settings

Hostname

Click “Modem Settings” in the menu.

Set Modem Hostname as FQDN.

Scroll down and Click “Save” and the modem will restart.

Modem Settings Hostname.png

Frontend

Click “Modem Settings” in menu

Change FrontEnd Address to fit your configuration.

Scroll down and Click “Save”

Modem Settings Frontend.png

Certificate(https) Settings

Click “Modem Settings” in menu

Click "Choose File" and choose pfx certificate from your harddrive/USB stick/other media.

Enter pfx certificate password in "Certificate Password" box and click "Save".

Modem Settings Certificate.png

User Settings

In the menu click “Modem Settings” and scroll down to “User Settings”

To change default admin user password (default “admin”), write new password in Password box just below admin username.

To change default sendsms user password (default “sendsms”), write new password in Password box just below sendsms username.

Click “Save” to confirm password change.

Modem Settings User.png

Control Panel

In the menu click "Control Panel".

Use Control Panel to see State of SMS Engine, turn on/off SMS Engine.

Control Panel.png

SMS

Inbox

Click “Inbox” in menu to see a log of incoming messages.

Inbox.png

Outbox

Click “Outbox” in menu to see a log of outgoing messages.

Outbox.png

Failed

Click “Failed” in menu to see a log of failed messages.

Failed.png

Write New

Click “Write New” in menu to see a log of outgoing messages.

Choose what modem to send from or leave as is to choose first free modem.

Insert mobile phone number to send to. (international prefix is mandatory)

Write text to send.

Click “Send” to continue.

Write New.png

Time Zone Settings

In the menu click "Time Zone Settings"

Time zone and NTP server settings

For External NTP servers check Enable External NTP (default) and choose External NTP Region (Default Europe)

For Internal NTP, uncheck Enable External NTP and write comma separated list of NTP servers in Internal NTP textbox.

To set your Time Zone, click Time Zone dropdown and choose your zone.

Click Save to change configuration.

Time Zone Settings.png

Tools

Click "Modem Settings" in menu and go to bottom of page.

Shell

In browser shell to change advanced settings (use with caution)

Modem Settings Shell.png

Reboot

Reboot modem.

Modem Settings Reboot.png

Root Settings

Change of root password requires login to shell.

Login to shell, run passwd command and follow instructions on screen.

Modem Settings Root.png