Difference between revisions of "Foxbox"

From UmsWiki
Jump to: navigation, search
Line 67: Line 67:
 
==System Login==
 
==System Login==
 
Once the modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), open a browser and go to <nowiki>http://192.168.1.2</nowiki> and click login in the upper right corner.
 
Once the modem is [[#Prepare Modem|prepared]] and booted (the modem will make a single beep when booted), open a browser and go to <nowiki>http://192.168.1.2</nowiki> and click login in the upper right corner.
[[File:Foxbox Login.png|none|frame|706x706px]]
+
[[File:Foxbox Login.png|none|1180x1180px|thumb]]
 
A login box will pop up. Login with username 'admin' and password 'admin'.
 
A login box will pop up. Login with username 'admin' and password 'admin'.
[[File:Foxbox Login Modal.png|none|frame|453x453px]]
+
[[File:Foxbox Login Modal.png|none|510x510px|thumb]]
  
 
==Main Page==
 
==Main Page==
After logging in, the system info page appears. This page shows status for the modem.[[File:Foxbox index menu closed.png|none|frame|1209x1209px]]Click on [[File:Foxbox menu button.png|frameless|23x23px]] to open the menu.
+
After logging in, the system info page appears. This page shows status for the modem.[[File:Foxbox index menu closed.png|none|1300x1300px|thumb]]Click on [[File:Foxbox menu button.png|frameless|23x23px]] to open the menu.
[[File:Foxbox index menu open.png|none|frame|1211x1211px]]
+
[[File:Foxbox index menu open.png|none|1300x1300px|thumb]]
  
 
==Network Configuration==
 
==Network Configuration==
Line 79: Line 79:
  
 
Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and [[Foxbox#Reboot|reboot]] the modem.
 
Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and [[Foxbox#Reboot|reboot]] the modem.
[[File:Foxbox Network Config.png|none|frame|1212x1212px]]
+
[[File:Foxbox Network Config.png|none|1300x1300px|thumb]]
  
 
==Modem Settings==
 
==Modem Settings==
Line 91: Line 91:
  
 
Scroll down and click 'Save'.
 
Scroll down and click 'Save'.
[[File:Foxbox Frontend inLogic Modem Settings.png|none|frame|1214x1214px]]
+
[[File:Foxbox Frontend inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
===Hostname===
 
===Hostname===
Line 99: Line 99:
  
 
Scroll down and click 'Save'. The modem will restart.
 
Scroll down and click 'Save'. The modem will restart.
[[File:Foxbox Hostname inLogic Modem Settings.png|none|frame|1209x1209px]]
+
[[File:Foxbox Hostname inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
====User Settings====
 
====User Settings====
Line 109: Line 109:
  
 
Click 'Save' to confirm password change.
 
Click 'Save' to confirm password change.
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|frame|1205x1205px]]
+
[[File:Foxbox UserSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
===SIM Settings===
 
===SIM Settings===
Line 117: Line 117:
  
 
Click 'Save' and click [[Foxbox#Reboot|Reboot]].
 
Click 'Save' and click [[Foxbox#Reboot|Reboot]].
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|frame|1212x1212px]]
+
[[File:Foxbox SIMSettings inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
==Control Panel==
 
==Control Panel==
 
Open the menu and go to 'Control Panel'.
 
Open the menu and go to 'Control Panel'.
  
Here, you can see staus, as well as turn on and off, the SMS Engine.[[File:Foxbox_Control_Panel.png|none|frame|1210x1210px]]
+
Here, you can see staus, as well as turn on and off, the SMS Engine.[[File:Foxbox_Control_Panel.png|none|1300x1300px|thumb]]
  
 
==SMS==
 
==SMS==
Line 128: Line 128:
 
===Inbox===
 
===Inbox===
 
To see a log for incoming messages, open the menu and go to 'Inbox'.
 
To see a log for incoming messages, open the menu and go to 'Inbox'.
[[File:Foxbox Inbox.png|none|frame|1207x1207px]]
+
[[File:Foxbox Inbox.png|none|1300x1300px|thumb]]
  
 
===Outbox===
 
===Outbox===
 
To see a log for outgoing messages, open the menu and go to 'Outbox'.
 
To see a log for outgoing messages, open the menu and go to 'Outbox'.
[[File:Foxbox Outbox.png|none|frame|1208x1208px]]
+
[[File:Foxbox Outbox.png|none|1300x1300px|thumb]]
 
===Write New===
 
===Write New===
 
To write a new SMS, open the menu and go to 'Write New'.
 
To write a new SMS, open the menu and go to 'Write New'.
Line 142: Line 142:
 
Write your message in the 'Message' field.
 
Write your message in the 'Message' field.
  
When you have finished, click 'Send'.[[File:Foxbox Write New.png|none|frame|1210x1210px]]
+
When you have finished, click 'Send'.[[File:Foxbox Write New.png|none|1300x1300px|thumb]]
  
 
==Time Zone Settings==
 
==Time Zone Settings==
Line 153: Line 153:
 
To change your time zone, choose a time zone from the 'Time Zone' drop down menu.
 
To change your time zone, choose a time zone from the 'Time Zone' drop down menu.
  
Click 'Save' to change your settings.[[File:Foxbox Time Zone Settings.png|none|frame|1202x1202px]]
+
Click 'Save' to change your settings.[[File:Foxbox Time Zone Settings.png|none|1300x1300px|thumb]]
  
 
==Tools==
 
==Tools==
Line 160: Line 160:
 
Use 'in browser' shell to change advanced settings.
 
Use 'in browser' shell to change advanced settings.
  
<u style="color:red;">Use with caution!</u> Please note that if you make any changes without consulting us first, support will be charged accordingly with our hourly rate.[[File:Foxbox Shell inLogic Modem Settings.png|none|frame|1197x1197px]]
+
<u style="color:red;">Use with caution!</u> Please note that if you make any changes without consulting us first, support will be charged accordingly with our hourly rate.[[File:Foxbox Shell inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
===Reboot===
 
===Reboot===
 
In order to reboot the modem, click on the 'Reboot Modem' button.
 
In order to reboot the modem, click on the 'Reboot Modem' button.
[[File:Foxbox Reboot inLogic Modem Settings.png|none|frame|1195x1195px]]
+
[[File:Foxbox Reboot inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
===Root Settings===
 
===Root Settings===
 
Change of root password requires login to shell. Default root password is 'odroid'.
 
Change of root password requires login to shell. Default root password is 'odroid'.
  
Login to shell, run password command and follow the instructions on screen.[[File:Foxbox Root inLogic Modem Settings.png|none|frame|1195x1195px]]
+
Login to shell, run password command and follow the instructions on screen.[[File:Foxbox Root inLogic Modem Settings.png|none|1300x1300px|thumb]]
  
 
==Update certificate==
 
==Update certificate==

Revision as of 15:24, 24 January 2019

UMS SMS Modem.. ( Certificate is required for use of Modem )

Foxbox.png

Network Port Openings

TCP port openings from server to modem.

Port Usage
22 SSH access
80 HTTP access
443 HTTPS access
3306 Database access

TCP port openings from modem to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

Inside Foxbox
Insert sim cards (sim2 cardholder is on the backside of the board)

01 – Plug-in antenna connectors

02 – Plug-in Ethernet cable

03 – Plug-in power cable

04 – Optional serial cable

05 – Optional USB extention

System Login

Once the modem is prepared and booted (the modem will make a single beep when booted), open a browser and go to http://192.168.1.2 and click login in the upper right corner.

Foxbox Login.png

A login box will pop up. Login with username 'admin' and password 'admin'.

Foxbox Login Modal.png

Main Page

After logging in, the system info page appears. This page shows status for the modem.

Foxbox index menu closed.png

Click on Foxbox menu button.png to open the menu.

Foxbox index menu open.png

Network Configuration

Go to the menu and click 'Network Config'.

Change the IP settings and press 'Save Configuration'. Go to the 'inLogic Modem Settings' page and reboot the modem.

Foxbox Network Config.png

Modem Settings

Frontend and Hostname settings

Frontend

Open the menu and go to 'inLogic Modem Settings'.

Change the 'FrontEnd Address' to fit your configuration.

Scroll down and click 'Save'.

Foxbox Frontend inLogic Modem Settings.png

Hostname

Open the menu and go to 'inLogic Modem Settings'.

Set the modem hostname as 'FQDN'.

Scroll down and click 'Save'. The modem will restart.

Foxbox Hostname inLogic Modem Settings.png

User Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'User Settings'.

To change default admin user password (default 'admin'), write the new password in the Password box, just below admin username.

To change default sendsms user password (default 'sendsms'), write the new password in the Password box just below sendsms username.

Click 'Save' to confirm password change.

Foxbox UserSettings inLogic Modem Settings.png

SIM Settings

Open the menu and go to 'inLogic Modem Settings' and scroll down to 'SIM Settings'.

Enable or disable PIN for modems and set PIN if needed.

Click 'Save' and click Reboot.

Foxbox SIMSettings inLogic Modem Settings.png

Control Panel

Open the menu and go to 'Control Panel'.

Here, you can see staus, as well as turn on and off, the SMS Engine.

Foxbox Control Panel.png

SMS

Inbox

To see a log for incoming messages, open the menu and go to 'Inbox'.

Foxbox Inbox.png

Outbox

To see a log for outgoing messages, open the menu and go to 'Outbox'.

Foxbox Outbox.png

Write New

To write a new SMS, open the menu and go to 'Write New'.

Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.

Enter the phone number you wish to send your SMS to in the 'To' field. Pleas note that international prefix is mandatory.

Write your message in the 'Message' field.

When you have finished, click 'Send'.

Foxbox Write New.png

Time Zone Settings

Open the menu and go to 'Time Zone Settings'.

The NTP & Time Zone Settings is by default set to enable external NTP.

For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.

To change your time zone, choose a time zone from the 'Time Zone' drop down menu.

Click 'Save' to change your settings.

Foxbox Time Zone Settings.png

Tools

Open the menu and go to 'Modem Settings'.

Shell

Use 'in browser' shell to change advanced settings.

Use with caution! Please note that if you make any changes without consulting us first, support will be charged accordingly with our hourly rate.

Foxbox Shell inLogic Modem Settings.png

Reboot

In order to reboot the modem, click on the 'Reboot Modem' button.

Foxbox Reboot inLogic Modem Settings.png

Root Settings

Change of root password requires login to shell. Default root password is 'odroid'.

Login to shell, run password command and follow the instructions on screen.

Foxbox Root inLogic Modem Settings.png

Update certificate

Step one - creating a certificate.pem file

Make sure you have the certificate as a­ . crt or .pem file. You should have received a certificate with a private key from your provider. Some providers send two or more files containing this. To handle the certificate, we need to extract the information from the certificate and private key and combine these two into one certificate.

If you use notepad to open the certificate (recommended), you will see this:

-----BEGIN CERTIFICATE----- 
Lots of data here...
-----END CERTIFICATE-----

When you open the private key certificate, you should see this:

-----BEGIN RSA PRIVATE KEY----- 
Lots of data here...
-----END RSA PRIVATE KEY-----

Or this:

-----BEGIN PRIVATE KEY----- 
Lots of data here...
-----END PRIVATE KEY-----

Start by creating a new .txt file in a folder and then copy the content of the private key into the new .txt file.

Now, open the certificate file, copy the content and paste it in after the private key.

Your file should look like this:

-----BEGIN PRIVATE KEY-----
MIIEvQIBAD...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIICsjCCAZqgAw...
-----END CERTIFICATE-----

Save the file by selecting all file types instead of .txt and name the file 'certificate.pem'.

Step two - installation

To install the certificate, you will need FTP software (you can freely select the FTP software you prefer).

Now, connect to the Foxbox using the server's IP address. This example uses 'FileZilla'.

Filezilla foxbox update certificate.jpg


When the client has connected, you will have the folder view where you can navigate to '/etc/sms/scripts'. You can use the folder view to navigate back to the path or you can simply paste the path into the remote site bar and press enter.

Now, you should be able to locate the certificate.pem file inside the folder.

Continue by navigating the local file view to the new certificate that we created in step 1 and upload it to the Foxbox.

Steep three

Open or download the SSH client program. This example uses 'putty'.

When you have the ssh client open, please connect using the Foxbox server's IP address.

When successfully connected, please use the root user to login, as it is the only user with permissions to restart the apache server.

In order to restart the apache server, please type:

/etc/init.d/apache2 restart

Press enter.

When the service is restarted successfully, 'OK' will appear in green text. If the service was unsuccessful, the error message will appear in red text.

After successfully restarting, open the Foxbox url and verify that the certificate has been changed and is valid.

Additional information

Additional information about the product, users, and programs used in the tutorial.

Usernames and passwords

A list of username and passwords
Username Password Description

SSH Clients

A list of SSH Clients
Program name URL
PuTTy https://www.putty.org/

Open source FTP Client

A list of FTP clients
Program name URL
WinSCP https://winscp.net/eng/index.php
FileZilla https://filezilla-project.org/