InLogic SMS Gateway

From UmsWiki
Jump to: navigation, search

Important

To be able to send SMS, the inLogic SMS Gateway requires GSM modems with USB interface. We recommend "HUAWEI LTE USB Stick Model: E3372".

Hardware Compatibility List

Huawei E3531

Huawei E3372 (inLogic's choice)

Huawei E3131i

TP-Link MA260

Network Port Openings

TCP port openings from server to gateway. TCP port opening where UMS sms sever service run.

Port Usage
22 SSH access
443 HTTPS access
3306 Database access

TCP port openings from gateway to server.

Port Usage
80 HTTP access
443 HTTPS access

Prepare Modem

20180516 104258-50%.jpg
Plug-in Modems
20180516 104358-50%.jpg
Plug-in Ethernet cable

Plug-in power cable

System Login

Once the gateway is prepared and booted, open a browser and go to http://192.168.1.2. Login through the 'Login' button in the top right corner.

Main Login button.png

You will now see a login box where you can log in with with USERNAME: admin and PASSWORD: admin.

Login.png

Main Page

After logging in, the system info page appears. This page shows the gateway's status.

Main.png

To open the menu, click on this icon: Foxbox menu button.png

Main with menu.png

Network Configuration

Click on menu tab 'Network config'.

Change the IP settings and press 'Save Configuration'. When you have saved your settings, Reboot the gateway as instructed below in 'Modem Settings'.

Network Config.png

Modem Settings

Hostname and Frontend Settings

Hostname

Open the menu and go to 'Modem Settings'.

Set 'Modem Hostname' as FQDN and save your changes. Your modem will now restart.

Modem Settings Hostname.png

Frontend

Open the menu and go to 'Modem Settings'.

If redirect is enable on iis set (HTTPS)

Change 'FrontEnd Address' to fit your configuration and save your settings.

Modem Settings Frontend.png

Certificate Settings (https)

Open the menu and go to 'Modem Settings'.

Click 'Choose File' and choose a .pfx certificate from your computer.

Entera a .pfx certificate password in the 'Certificate Password' field and click 'Save'.

Modem Settings Certificate.png

User Settings

Open the menu and go to 'Modem Settings'.

The default admin user password is 'admin'. To change the default admin user password, write the new password in the 'Password' field just below the 'Username' field admin.

The default sendsms user password is 'sendsms'. To change the default sendsms user password, write the new password in the 'Password' field just below the 'Username' field sendsms.

Click 'Save' to confirm the password change.

Modem Settings User.png

Control Panel

Open the menu and go to 'Control Panel'.

Here, you can see staus, as well as turn on and off, the SMS Engine.

Control Panel.png

SMS

Inbox

To see a log for incoming messages, open the menu and go to 'Inbox'.

Inbox.png

Outbox

To see a log for outgoing messages, open the menu and go to 'Outbox'.

Outbox.png

Failed

To see a log for failed messages, open the menu and go to 'Failed'.

Failed.png

Write New

To write a new SMS, open the menu and go to 'Write New'.

Choose the modem you wish to send your message from in the drop down menu 'Outgoing channel'. If left blank, the system will choose the first available modem.

Enter the phone number you wish to send your SMS to in the 'To' field. Pleas note that international prefix is mandatory.

Write your message in the 'Message' field.

When you have finished, click 'Send'.

Write New guide.png

Time Zone Settings

Open the menu and go to 'Time Zone Settings'.

The NTP & Time Zone Settings is by default set to enable external NTP.

For internal NTP, uncheck the 'Enable External NTP' box and write a list of NTP servers separated by comma, in the 'Internal NTP' field.

To change your time zone, choose a time zone from the 'Time Zone' drop down menu.

Click 'Save' to change your settings.

Time Zone Settings.png

Tools

Open the menu and go to 'Modem Settings'.

Shell

Use 'in browser' shell to change advanced settings.

Use with caution! Please note that if you make any changes without consulting us first, support will be charged accordingly with our hourly rate.

Modem Settings Shell.png

Root Settings

Change of root password requires login to shell. Default root password is 'odroid'.

Login to shell, run password command and follow the instructions on screen.

Modem Settings Root.png

FAQ

Linux commands

How to change IP settings

  • nano /etc/network/interfaces.d/eth0
  • nano /etc/resolv.conf
  • reboot

Logs

Log viewers
  • tail
  • tail -f (this is similar to using cmtrace in windows)
  • nano
  • vim
Log files
  • /var/log/smstools/smsd.log
  • /var/log/syslog
  • /var/log/mysql/error.log
  • /var/log/apache2/error.log
See USB devices
  • lsusb

Rest API

Theres a REST API to use, to send messages from the inLogic SMS Gateway.

Title
URL source/send_sms.php
Method POST
URL Parameters Username

Password

To

Message

Success Response 200 - Success
Error Response 401 - Unauthorized
Error Resposne 403 - Forbidden
Error Response 500 - Internal server error
Sample Request source/send_sms.php?username=smsuser&pwd=testpassword123&from=ums&to=22446688&message=Dette er en test besked
Notes

Example

curl -X POST https://modem.ums.dk/source/send_sms.php?username=<USERNAME>&pwd=<PASSWORD>&from=ums&to=<RECIEPIENT>&message=<MESSAGE>